CCTV camera cable connectors tools for Installation – CCTV installation guide 2018

CCTV camera cable connectors tools for Installation – CCTV installation guide 2018

We generally knows security camera is equal to cctv camera. The full abbreviation of cctv camera is close circuit television camera. Here we will discuss about cctv camera cable connectors tools for Installation. When we need to install cctv camera system then we need to get help for any technician, or any technical assistant for setup cctv camera cable connector or tools.  Hope it will help you to setup or install any cctv camera cable connector tools. Lets see the cctv installation guide 2018

security camera cables and connectors

CCTV Camera installation is little bit complex for a new beginner. But if you get complete guidelines for it, it will be easy. Just need to learning dvr operating and others work are easy. You will get more information about CCTV camera materials for installation and monitoring here

security camera cables and connectors

At first make an overview for setup cctv camera cable connectors tools. Lets face it!

Where We will setup security camera :

  1. Garden
  2. Garage
  3. Kitchen Room
  4. Bed room
  5. Living room
  6. Study room
  7. Shop
  8. Office
  9. Dairy Firm
  10. Institute
  11. Entrance and exit point of Organization
  12. Store
  13. Vehicle Depot

Considering all these place we have to analyze which camera we will setup there. Lets see!

⇒ Indoor Camera

⇒  Outdoor Camera

⇒  Night Vision Camera

⇒  IP Camera

⇒  Motion Detect Camera

Best Outdoor Camera

People using Indoor camera at kitchen room, bed room, study room, living room etc. outdoor camera uses at garden, garage, dairy firm etc. Night vision camera is perfect for store, vehicle depot and shop. IP camera and motion detect camera is perfect for entrance and exit of organization, institute and office. You can use cctv camera as your choice in the perfect location.

In every place cctv camera system setup is same. Lets see the overview step by step :

  1. Unplug and open all cable (Power Cable, Data Cable and tools)
  2. plug all cable with camera (Power Cable and Data Cable)
  3. plug all cable with dvr (Power Cable and Data Cable)
  4. plug all cable with monitor (Power Cable and Data Cable)
  5. Switch on power of DVR
  6. Switch on Camera
  7. You can see camera view from monitor through DVR

Monitoring is important after installation, so to monitoring cctv footage we have to see all camera view from our smartphone or computer. To view camera from smartphone we can use N_eye application. You can monitor your all camera from outside through internet. You can see the guidelines how to see online cctv camera on pc. Use Blue Stack software to see online cctv camera on pc.

SHOP NOW CCTV CAMERA TOOLS FROM AMAZON

Share If You Like...

Leave a Comment